View Single Post
Eagledriver Eagledriver is offline
Registered User
 
Join Date: May 2003
Posts: 3,181
If you really need to remove the shim then you don't have alot of options. One thing you could do is have the case machined at the spigots but that's alot of time and expense. I haven't tried to build an engine without the shims. Maybe someone who has tried this can comment. I would suspect you'd be ok if you use some non-hardening sealant on it like Curil T.

-Andy
__________________
72 Carrera RS replica, Spec 911 racer
Old 12-03-2005, 05:13 PM
  Pelican Parts Technical Article Directory    Reply With Quote #2 (permalink)