View Single Post
Conrad W Peden Conrad W Peden is offline
Registered User
 
Conrad W Peden's Avatar
 
Join Date: Apr 1999
Location: Victoria,BC,Canada
Posts: 675
Garage
Post

Did my clutch a while ago and had a similar symptom.

What had happened was the pressure plate was hung up on one of the locating pins that is in the flywheel. The pressure plate wasnt seated all the way on the flywheel, even though it was torqued down.

How I noticed was the t/o bearing and yoke had no travel at all. The pressure plate was out that far.

Turns out the guy that machined the flywheel used the old dowels! Cant complain it was free.

Good Luck

------------------
CWP/VIR
72 914 L20E in rusto.
73 914 L20E 2.0L in resto.
a914lover73@hotmail.com
Old 10-13-2001, 08:52 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)