View Single Post
Jim Williams Jim Williams is offline
Registered User
 
Jim Williams's Avatar
 
Join Date: Feb 2005
Location: Huntsville, AL
Posts: 1,346
Just another observation... I just did this a couple days ago, and only removed the plug from one end. There is really no need that I can see to remove both plugs, as the tube extracted easily enough from one end. I use a length of wire with a small loop in one end, and some cotton string wrapped around two fingers 5 or 6 times, then slipped off the fingers and into the loop in the wire and dipped into some mineral spirits, then pulled through the tube several times. Makes me feel better to have it out, easier to hold up to the light and check it out. Then high pressure air to blow out the tubeand also blow out the drilled passages in the housing itself.
__________________
Jim
www.jimsbasementworkshop.com
(CIS Primer for the 911)
(73 911T (RS look) coupe)
(Misc. 911 Parts for Sale)
Old 12-17-2005, 05:31 PM
  Pelican Parts Technical Article Directory    Reply With Quote #18 (permalink)