View Single Post
924Sman 924Sman is offline
Certified Rennwerker
924Sman's Avatar
Join Date: Oct 2002
Location: Kansas
Posts: 1,902
Send a message via MSN to 924Sman
944.606.115.00.....if for an 84 na

Carb cleaner....Attach a wire to a DC source and disconnect the plug and hose. 3 pin iirc one grnd, 2 -/+, connect the hot lead to the neg pin and ground then allow the valve to open/close then reverse the polarity, other pin and it returns the valve to the original position. Do this several times until the valve moves freely/smoothly. You should be able to hear it open. Use the cleaner as you work the valve.
PCA " I've been everywhere, done everything......just can't remember any of it!"

Last edited by 924Sman; 01-01-2006 at 05:17 AM..
Old 01-01-2006, 05:11 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)