Thread: Stuck camshaft
View Single Post
billd billd is offline
Registered User
 
Join Date: Dec 2005
Location: Palo Alto, CA
Posts: 203
Quote:
Just curious - did you have anything machined (case spigots, heads, etc.)? If so, this could cause alignemnt issues between the chain housings and the cam decks (housings)...provided material wasn't also removed from the chain boxes.
The heads were machined - guides replaced, several valves replaced, seats cut, valves ground, and mating surface resurfaced. However the resurfacing did not remove enough metal to make a difference. The cam is well centered on the hole in the chain housing.
__________________
Bill
1964 356 SC Coupe
1969 911 3.0L
1973 914 2.0L four & 1974 914 3.2L six, Megasquirt, twin-plug, AX car
2002 Boxster S
Old 02-07-2006, 03:32 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)