View Single Post
Miguel Antonett Miguel Antonett is offline
Registered
 
Join Date: Jul 2003
Location: Back in B'ham, AL
Posts: 3,461
If lucky you can pressed it out by hand; there is nothing holding it in place after removing the nut/shims/pulley. Don't pull on the tips of the blades, hold it from the middle/solid and pull it straight out. If not go wilferch route.
Old 06-12-2006, 10:45 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)