View Single Post
mb911 mb911 is offline
Registered User
 
Join Date: Jan 2003
Location: Burlington, Wisconsin
Posts: 8,816
Quote:
Originally posted by beepbeep
My company car has C/R of 9.35:1 and runs up to 1.3 bar of boost, straight out of factory It's a SAAB.

You can run heaps of boost even on hi-comp engine as long as you retard the ignition enough. You won't be making any power though but it's seems that most important thing nowadays is to boost as much as possible, not to make power

Imagine car A and car B, same C/R, same turbocharger (let's say it uses K27), but different boost.

Car A boosts something like 0.7 bar and has ignition mapped for optimal BMEP troughout range (BMEP is all that matters). It will have good torque, good off-boost response, it will be frugal with fuel and intercooler/turbo won't need to work as hard as turbo efficiency will be on-spot and density-ratio would be low.

Car B runs 1.3 of boost. In order to allow that kind of boost ignition has to be dialed back. Turbo will be out of it's efficiencyy range, pumping hot air around. Intercooler will need to work harder and you will be feeding hot air into engine, further aleviating need for less ignition advance. You will need to pump more fuel into it to compensate all that air and it won't neary make as much power as 1.3 bar of boost indicate, use lot's of fuel and will fail more often.

It's always a trade-off. If you want lot's of power trough lot's of boost you need to build it with low C/R and turbo that is made to work efficiently with high pressure ratios. Such engine will be laggy.
thats is what some th HP drag racers are doing these days for optimal performance and effeincy
__________________
Ben

Current project 73 914-6 Gt project rusteration 2.4

*Reproduction 914-6 oil tank source* 2623647426
Old 11-02-2006, 03:05 AM
  Pelican Parts Technical Article Directory    Reply With Quote #15 (permalink)