Thread: CV boot Help
View Single Post
911rudy 911rudy is offline
Registered User
 
Join Date: Mar 2005
Location: Near Atlanta
Posts: 128
I just replaced one on my 930, (87), and it was real tight but it went on with grease and pulling. The way I did it was to put the little clamp on first, then turn the boot inside out, grease it well, then pull the big end over the axle and pull like hell. Once the little end slips on then just pull the big end over it and you are done. Don't forget to put the clamp on first. (Ask me how I know this).
__________________
911rudy
Old 11-10-2006, 02:47 PM
  Pelican Parts Technical Article Directory    Reply With Quote #7 (permalink)