View Single Post
The Turk The Turk is offline
Remember
 
The Turk's Avatar
 
Join Date: Jun 2003
Location: California
Posts: 217
Did you measure the deck height of the pistons to the top of the cylinders when you assembled the motor ?
If the deck height was correct your heads must have had a lot of material removed for the housings to be that far off.
If both surfaces are good you could probably eliminate the gasket with a good sealant, Curil T would do the trick.
Good Luck.
__________________
Gary
1975 911S G50 3.5 Twin Turbo
Old 11-16-2006, 07:21 AM
  Pelican Parts Technical Article Directory    Reply With Quote #4 (permalink)