Thread: 3.3 Turbo
View Single Post
A930Rocket A930Rocket is offline
OFF THE BOOST PIPE NOW...
 
A930Rocket's Avatar
 
Join Date: Oct 2003
Location: Mount Pleasant, South Carolina
Posts: 6,662
Not sure if I understand your question. Was the turbo rebuilt or the engine?

I take it that the turbo was rebuilt. If oil is getting past the seals and into your intercooler, then whoever rebuilt needs to look at it again or your scavenge pump is working right. Are you using the factory line from the top of the engine (near the crankcase breathe) to the turbo? There's also a small ball/check ball below the banjo fitting here. From the turbo it goes to a small tank and then to the scavenge pump. The pump is driven off two hex head bolts on the left cam shaft. Is it engaging properly?

Last edited by A930Rocket; 11-27-2006 at 04:37 PM..
Old 11-27-2006, 04:32 PM
  Pelican Parts Technical Article Directory    Reply With Quote #2 (permalink)