Thread: What is this?
View Single Post
bkreigsr bkreigsr is offline
cycling has-been
 
bkreigsr's Avatar
 
Join Date: Sep 2004
Location: Jersey Shore
Posts: 4,531
Quote:
Originally posted by 911rudy
If you can't manually move the lever it might be frozen down at the two heat control valves. If the heater control cover is off and there is nothing else connected to the arm, then you should be able to move it. If not then you need to go under your car and spray some lubricant on the two valves and free them up.
my 'climate control' lever is frozen also, as PO had the set screw removed to the manual lever (77)
where are these referenced 2 valves?
I can get heat by manually moving the heat lever, so the flappers must be operating okay.
Thanks
Bill K
__________________
73 911 MFI, 77 930, 85 911
Old 12-06-2006, 12:07 PM
  Pelican Parts Technical Article Directory    Reply With Quote #12 (permalink)