[mb911]

Originally posted by wcc
mb911 (Ben) so you had to fab up all the piping, or do you sell the weld up kit? Do you have a link to that kit? I haven't found one. What's the job involved if I picked up a set without heat and wanted to add it?

Here is the goingsuperfast ones, and for $1200 w/heat seems like a good deal.
http://cgi.ebay.com/ebaymotors/Porsche-911-turbo-930-exhaust-headers_W0QQitemZ160038627855QQihZ006QQcategoryZ33 631QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
Item number: 160038627855
NOTE: You have to scroll down through the ad to see the ones with heat.

These are the OBX and they are even cheaper. But no heat. I never heard of them so are they any good?
http://cgi.ebay.com/ebaymotors/OBX-TURBO-HEADER-MANIFOLD-PORSCHE-930-78-89-ST-STEEL_W0QQitemZ260070690638QQihZ016QQcategoryZ3363 2QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
Item number: 260070690628

EDIT: I just fixed those links.

My internet went down before my last reply could go through.

But to this point we only provide a weld up kit as I do not have a 930 here to mock up exact locations for mufflers etc. so what I do is buy 95% of the kit from ssi and the whole kit is 321 and 347 so we are dealing with top notch stuff

I add to the kit 4 2 inch elbows and 2 2" v band flanges and this makes it complete weld up kit . It would take a good car guy/fabricator 2 hours to cut and weld up the kit. I have never seen anything like this as far as qulity. I don't sell a bunch and at 1550 they are kind of expensive but are not equaled by anything I have seen. here is a pic of the 347 flange that is for my car that I changed the flange for my T4 T04e Turbo..