View Single Post
BoxxerSix BoxxerSix is offline
Registered User
 
BoxxerSix's Avatar
 
Join Date: Jun 2006
Location: Ballston Spa, NY
Posts: 528
Turbo owners.....collective spool data

I'm collecting data here that I need for a long term, ground up P-car project I'm building and can use a good post from all Turbo owners regarding your engine RPM vs full boost spool time(lamens = at what RPM do you see your full boost setting). There's nine specific variables I'm looking for so if you could take a moment to fill me in I'd greatly appreciate it.

1) Engine displacement
2) Turbocharger used(Model, custom wheel trims, divided housings..... please note these details if applicable and known)
3)Max boost pressure and what RPM achieved
4)Camshafts being used
5)Exhaust system on your car
6)Year/model transaxle in your car(custom ratios? please note)
7)Stock or LWFW
8)EBC, MBC, or direct line to wastegate
9)SP or TP ignition.


I'm specifically looking for larger displacement(3.6L+), large single turbo setups, but ALL information is helpful. I want to try and keep the posts clean with direct information to the list above, and on-topic. Helps me sort the information easier, and makes for a nice info-specific post to look back on for anyone else that may be in need of this type of information. Questions(if any) ask away, just drop them BELOW your list of variables on your post.

Again, greatly appreciated
__________________
Adam Hennessy
Old 02-19-2007, 09:53 PM
  Pelican Parts Technical Article Directory    Reply With Quote #1 (permalink)