View Single Post
BoxxerSix BoxxerSix is offline
Registered User
 
BoxxerSix's Avatar
 
Join Date: Jun 2006
Location: Ballston Spa, NY
Posts: 528
yes you need to remove the small rubber plug one the side of the release lever pivot and remove the lever pivot pin from the transaxle. just thread a small bolt into the pin and pull on that. i think the thread pitch is 6x1.0mm but don't quote me on that.

release fork stays with the throwout bearing on the clutch when you separate the drivetrain....
__________________
Adam Hennessy
Old 02-24-2007, 02:47 PM
  Pelican Parts Technical Article Directory    Reply With Quote #3 (permalink)