Thread: IA adapter
View Single Post
Ken911 Ken911 is offline
Ken911's Avatar
Join Date: May 2005
Location: Loxahatchee, florida
Posts: 2,748
I went through several seals, they kept cutting then one of the pieces fell inside the turbo. So i removed the turbo unit, took some 220 grit wet dry papaer and smoothed the sharp corners off. then held the adapter down on the turbo with a piece of wood then smacked it good with a mallet. popped right on after several trys. make sure you stuff a rag in hole to keep the pieces of the first couple o rings that you cut out of the turbo.
88 turbo Guards red Targa slant nose, and yes I am a horsepower junkie, 3.4liter,7.5 to 1 JE pistons, Adjustable WUR, Imagine fuel head, 1 bar waste gate headers,allthe cis toys. Now apart to become the next EFI monster. fabbing my own intake, headers Individual throttle bodies, MS-3, pauter rods, Xtreme twin plugged heads, gt-2 evo cams cop's.
2019 Silverado 6.2L
Old 02-26-2007, 05:21 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)