View Single Post
slow&rusty slow&rusty is offline
Registered User
 
Join Date: May 2005
Location: Houston
Posts: 3,862
I have been down this road and wrote a Tech article that turned into a 2page Thread over on Rennlist, but for the benefit of yourself and other members who will be travelling down this road (pardon the pun!!).

Do as william says and soak those barrel nuts like crazy over 2days with PB. AND PLEASE use an Impact gun, as the impact (hammering) action will break the nuts loose, if you use a breaker bar you will end putting so much torque on the stud, thats how people break them. If you do not own an Impact Gun, do yourself a favor and buy one, I like the Electric 1/2" ones - they are cheap brand new too or check your local Pawn shops.

Rear Bumper has to come off for sure!

You really need a buddy to come and help as well or a patient wife \ girlfriend to help. If you do not need the emissions, here is an opportune time to junk them.







__________________
Ole Skool - wouldn't have it any other way

Last edited by slow&rusty; 03-02-2007 at 05:06 PM..
Old 03-02-2007, 05:01 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)