View Single Post
kellcats521 kellcats521 is offline
Registered User
 
kellcats521's Avatar
 
Join Date: Feb 2005
Location: Atlanta Metro
Posts: 219
Mark,

The intercooler is the longneck version (not the drop in version)which as far as I can tell requires the following modifications to install:
1) removal of the OE diverter valve and replacement with C2 turbo(965) 90-deg. hose/diverter assembly and a short pipe.
2) remove OE compressor outlet tube (turbo to intercooler) and replace with C2 turbo rubber hose.
3) replace or modify OE air cleaner to clear intercooler outlet.
4) drill and tap fittings for WUR, AAR, boost pressure sending unit and boost cut off sending unit.
5) slightly modify the mounting studs.

But, it's all good - I could tell which one it was by the pictures in the ebay listing. I just wanted to make sure I didn't miss anything in getting ready to put it in.

Pat Kelley
87 930
Old 04-26-2007, 02:26 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)