View Single Post
Gino Gino is offline
Registered User
 
Gino's Avatar
 
Join Date: Nov 2004
Posts: 55
Gumba11-
there has been threads on this at Rennlist, but I remember it's AFTER the turbo, about 3" to let the turbulence settle and usually bunged in the 12 o'clock position.

I'm running a Magnaflow as well (the 3" I/O 6" dia tube). I believe that unit is about 18" long, but found it too loud for me. I doubled back under with a mini Borla XR1 tube rather than straight pipe and out the driver's side. now quieter, but much deeper than stock or a bypass. if your interested in pictures, they are on another earlier dated thread something about "does size matter". when dyno'd, the Magnaflow/Borla setup cost me 23hp compared to the Fabspeed single which was intolerably loud.

you should have enough room to place your O2 sensor correctly. before you do, do a search on the Rennlist Forum just to make sure if somebody else here on the Pelican board doesn't confirm me.
__________________
-G
Old 06-04-2007, 03:49 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)