View Single Post
kellcats521 kellcats521 is offline
Registered User
kellcats521's Avatar
Join Date: Feb 2005
Location: Atlanta Metro
Posts: 219
I would buy longer studs for the front, and keep the rears as they are by using open ended lugs. Or, if that's not an option, buy all new studs. Re-using wheel studs will in the best scenario work, but I personally wouldn't be too confident that re-installed studs wouldn't slip/spin in the hub at some point.

I did a similar swap when I went to BBS wheels in that I put the 1" rear spacers on the front (with new studs). I had to go to a 2.0" spacer on the rear, so I kept the original studs and used a spacer that bolts to the hub using them.

Pat K
87 930
Old 06-15-2007, 06:01 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)