View Single Post
Gumba11 Gumba11 is offline
Registered User
Gumba11's Avatar
Join Date: Feb 2005
Location: Portland
Posts: 845
Porsche Crest Clutch issues.....

Hey guys,

I have now installed the engine and trans back into my 77 930 using a stage 2 KEP pressure plate and their "Race Organic" disk.

I have installed it no differently than any other clutch I have done but no matter where I adjust it to I cannot seem to get it to release. The fingers of the fork are properly engaged to the T.O. bearing and I have an access hole in the top side of my bell housing I can reach my finger into and when the clutch pedal is pushed I can feel the fingers of the pressure plate moving so I know it is working.

Is it possible that a stage 2 disk is thicker and there is a different adjustment method that needs to be done? I really dont want to have to pull the engine and trans back out but at this time I dont see any other options.


..............................................Chri s
77 930 "P Zilla" 3.2 Litre w / EFI conversion
Old 07-01-2007, 07:29 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)