View Single Post
magic930 magic930 is offline
Registered User
magic930's Avatar
Join Date: Apr 2003
Location: Carnation, WA
Posts: 623
I just tested mine today. I get 4.5 amps at the rear and 5.3 at the front. This is in line with the bentley manual, anything under 6amps is OK, both pumps should be running for the test. By the way the easiest place to check this is at the fuse panel, two wires go into a single fuse . Just disconnect a single wire and jump it here with your test equipment then swap wires for the other pump.
Old 07-22-2007, 02:55 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)