View Single Post
shanghai_todd shanghai_todd is offline
Registered User
Join Date: Nov 2006
Location: Shanghai/Florida
Posts: 754
Turbo Conversion Question

Question for all the 930 guru's

I have been collecting parts to start a 3.0SC turbo conversion and listed below are the parts that I have already pieced together and some pictures. My question now is in regards to the injector and injector blocks. My plan is to use the intake and fuel head from a 86 930, I am told that from the picture it is a Euro fuel head that flows more fuel so I a now worried about what year injector and injector blocks I should use. Are the 78~86 injector and blocks different and since I will use a 3.0 should I go smaller or larger?

Any suggestions or recommendations will be appreciated. Once I start the install I will also start a new post with plently of step-by-step pictures

(1) 86 930 Intake
(2) Intercoller "Stock but polished"
(3) Garrett TO4E turbo
(4) Ordering GSF headers with T4 Flange
(5) MSD BTM to manage timing under boost
(6) Still need wastegate
(7) Still need wideband A/F monitoring

Old 08-03-2007, 02:56 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)