View Single Post
sand_man sand_man is offline
resident samsquamch
 
sand_man's Avatar
 
Join Date: Oct 2005
Location: Cooterville, Cackalacky
Posts: 6,758
Many thanks, Nathan. I understand what you're saying, but follow this:

The factory 8X16 Fuchs for the front of my car have an offset of ET11 (we'll round).
So I think that even with my current SSR wheels at 8.5X18 ET30, which were configured by TireRack to be a "suitable fit", I don't see how the fronts are centered, now. There are no after-market spacers installed to adjust offset.

As you mentioned, I'm more concerned with getting the front figured out, as I'm confident the rear will not be a problem.

I've been playing with an on-line wheel offset calculator. I won't purchase any spacers until I actually have the wheels in hand and mounted with tires. Right now, I'm thinking of running a 21mm H&R DRM spacer on the front. Being that the wheels I'm interested in purchasing are 9X18 ET50 (for the fronts), this spacer would bring my offset down to ET29. My only concern is in pushing the outer edge of the wheel (fender side) too far.

I've also learned that this particular wheel was available in a 5X130 bolt pattern. So right now, I'm just looking at spacers (not 5X100 adapters).
__________________
-jeff
back in the saddle: '95 993 - just another black C2
*SOLD*: '87 930 GP White - heroin would have been a cheaper addiction...
"Ladies and Gentlemen, from Boston Massachusetts, we are Morphine, at your service..." - Mark Sandman (RIP)
Old 08-15-2007, 04:59 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #11 (permalink)