View Single Post
Jim2 Jim2 is offline
7.0:1 > 11.3:1
Join Date: Oct 2003
Location: Calgary
Posts: 1,865
Sqeeze the shackle clamps together a little with a vice so the bolt holes aline. You may need to use a rat tail file to oblong the bolt holes too.

The 911 bar is straight, the 930 bar is identical only with a dip in the center reigon to clear the trans crossmember. I used a 911 bar on my 930 and I cut a 1/2" aluminum spacer for each side to go between the "U" bracket and the mount on the car.
Old 09-14-2007, 01:42 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)