View Single Post
spuggy spuggy is offline
Registered User
 
Join Date: Jul 2003
Location: Glorious Pac NW
Posts: 2,770
Quote:
Originally Posted by Alan L View Post
It is an '82 930, but I don't know what type of studs. Have yet to receive the car - in transit. But it has just had head work done on it 500km ago, and I intend to use it on track - so would like to go through all these things prior too.
I don't know jack, but it's my impression that the factory con rod bolts are much more of a worry than the factory head studs, unless you're making very silly power (in which case there's a lot of other things you'll be doing, doubtless).

Of course, that might just be me being over-sensitive because I had a rod bearing spin 3 weeks after an over-rev, 8,000 miles into ownership.

But my wrenches say a long-time 3.2 owner whose car they look after (same crank, rods, rod bolts as the 3.3) had exactly the same thing happen last year with 115K on the motor. And he doesn't over-rev.

Quote:
I think the Dilivar studs are non- magnetic? Otherwise, how will I be able to determine what type I have?
The 911 torque value is 23 ft/lb - which sounds very similar to what you are quoting. Is that for the 930?
Thanks
Alan
Lots of good threads on identifying head studs in the rebuild forum.

Of course, they're qiute easy to identify when all you have to do is look at the invoice, heh.

I ordered SuperTec studs because I was still considering twin-plugging at the time, because they're relatively cheap from our host, include the nuts & washers, and the nuts (not by accident) won't foul the lower spark plugs. And if Henry doesn't know what he's doing, I might as well give up, was part of my reasoning.

My factory manual (you're gonna need one or more of those) gives stock studs as 7.5 ft/lbs, followed by 23.5 ft/lbs, with Optimoly HT applied to the contact surfaces of the nuts and stud bolt threads.

Spec booklet (mine only covers up to '81 models) gives 33 Nm where the factory manual gives 32Nm, and omits the two-stage and lubrication info.
__________________
'77 S with '78 930 power and a few other things.
Old 09-25-2007, 01:27 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)