View Single Post
e170drvr e170drvr is offline
Registered User
 
e170drvr's Avatar
 
Join Date: Sep 2006
Location: Evansville IN
Posts: 261
Garage
Good to hear that the system pressure is not a biggie. I guess I need to tear it all apart hook .5 bar up to the wur, put it back together and then check the full throttle enrichment while the car is running. hopefully with the wur being powered it should be fine too. That only leaves me with the high cold pressure, and it sounds like everything else is good. I am turning the pumps on by removing green connection behind pressure plate and turning ignition on. The pumps will not turn on until I ground the overpressure sensor line, which is currently installed on my intercooler.

Cheers,
Eric
87 930/68
Old 09-27-2007, 11:03 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)