View Single Post
BK911 BK911 is offline
Home of the Whopper
BK911's Avatar
Join Date: Mar 2001
Location: Rocky Top, TN
Posts: 5,379
Right or wrong, I use the same method that Scott uses; a 1-13/16 socket from sears with the fly wheel locked. Several local shops use this method as well. I tighten down as much as I can with the crowsfoot and hold back on the cam, verify the lift, then to get the final torque value I break out the socket. It's much easier to remove the nut this way too.
'71 911E Targa rustbucket
Old 09-28-2007, 07:29 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #9 (permalink)