Thread: cmw heads
View Single Post
turbobrat930 turbobrat930 is offline
E-85 sippin drunk
 
turbobrat930's Avatar
 
Join Date: Jan 2002
Location: Warner Robins, GA
Posts: 1,506
Quote:
Originally Posted by NathanUK View Post
What speed are you guys talking about with the cnc?

Can you explain to a Noob please?

TIA

Nathan, When you use a CNC machine, you can set the tool speed ( the speed that the bit it travelling itself) as well as the feed speed ( how fast the tool moves around a part). If it is too fast, such as trying to rush a part to get more done in a certain time, the finish will not be as good, and you also intruduce chatter into the equation. Basically what you end up with is not a smooth finish.....
__________________
Brad...930 gt-1 racecar, increased displacement to 3.6L, JB racing Cylinders, JE 8 to1 pistons, stroked crank, Carrillo rods, extrudehoned 3.2L intake, full bay Bell I/C, GT-2 EVO cams, Rarly8 headers, GTX-35RS turbo, twin plug, P&P heads, Link G4 EFi system, G-50/50 with LTD slip and oil squirters/oil cooler, zork tube, full race coilover system, with carbon fiber body, full cage, E-85 sippin drunk
Old 10-06-2007, 04:47 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #8 (permalink)