View Single Post
JFairman JFairman is offline
Registered User
 
Join Date: Jul 2006
Location: S. Florida
Posts: 7,212
They thread apart to clean them or change the filter element.
You can see the seam on the tapered part on the right side next to the threads in the picture.
There are wrench flats at each end for unscrewing them and for holding it when installing couplers or line fittings.

A 90 or 45 degree 8AN female coupler to angle it upward would install it nicely to a B&B sump tank.

If you have a zork tube on your wastegate you have a lot of room to install it.
With the porsche wastegate muffler it's a little tighter but still doable.

I think I'm going to try it even though I use synthetic oil and let it idle a minute after driving.

Not only are the cam spray bars vulnerable to coked oil carbon chunks, so are the piston squirters and there's no way to check if they are clogged.
Old 10-08-2007, 02:57 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #35 (permalink)