View Single Post
Gregsgroup Gregsgroup is offline
Greg
 
Gregsgroup's Avatar
 
Join Date: Sep 2007
Location: Worcester, MA
Posts: 63
Spuggy, the crazy thing is the bolts are ARP. The motor only had about 2k on the rebuild by the PO it before it spun. My guess is either, sloppy build or low oil, leaning toward sloppy build. When I was removing the flywheel, three of the bold were quite loose..scarry.

The crank is at the machine shop being evaluated, depending on its condition, either source a used one or send it out to a crankshaft shop supertec reccommended in cali

As for your rods, let me know if you would like to part with the pair or the entire set with a PM. That would help greatly.

Cheers
Greg
Old 11-13-2007, 06:44 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)