View Single Post
BoxxerSix BoxxerSix is offline
Registered User
 
BoxxerSix's Avatar
 
Join Date: Jun 2006
Location: Ballston Spa, NY
Posts: 528
I had that same wheel bolted up to a Sparco QR in my car awhile back.. Don't see why the PEL unit wouldn't works there if it's got the Momo pattern as Momo/Sparco use the same 6 bolt pattern. It's just going to bring the wheel ~3.5" closer to you if that's tolerable.

I modified my Momo adaptor by cutting it down to weld on the splined section of the Sparco QR to reduce the total wheel protrusion towards the driver. Did that because I didn't want to hack off the OEM wheel splined section from the steering shaft so that When I sold the car, I could swap the OEM wheel back in without a hassle.
__________________
Adam Hennessy
Old 11-14-2007, 11:53 AM
  Pelican Parts Technical Article Directory    Reply With Quote #2 (permalink)