Thread: Am I crazy?
View Single Post
porschedude996t porschedude996t is offline
Registered User
 
Join Date: Jun 2007
Location: CALIF
Posts: 22
Quote:
Originally Posted by equality72521 View Post
I'm thinking about tackling a valve job myself on my 930. I would need a machine shop to seat the valve properly but the rest I should be able to handle. Anyone else done this? Am I crazy to think I can do this? I've never tackled anything in car repair yet that I couldn't finish myself so I don't see why this will be any different. Opinions?
I rebuilt the whole engine including the heads. I replaced the valve guides and reamed them. I was going to grind the seats myself at the local JC, but the stones they had were all too small. I would have had to grind all of there stones down in size and that would have pissed off all the V-8 guys. Anyway I had the seats ground (3 angle) for 5 bucks a head. I set up the installed valve spring height.

You can do it...
__________________
Keith
Old 11-20-2007, 10:29 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #9 (permalink)