View Single Post
beepbeep beepbeep is offline
Registered User
beepbeep's Avatar
Join Date: Jun 2001
Location: Sweden
Posts: 5,595
Reasons for ECU to close your idle motor shut might be following:

- ECU believes engine is idling too high.
- Step-motor in idle valve is faulty.
- Idle valve is wired incorrectly.

If you let the engine run with disconnected valve and it runs with somewhat high idle RPM, ECU will try to lower that RPM by shutting the valve closed. That might be the reason that secondary valve connected to ECU (but not in the loop) is getting shut by ECU. I would recomend swaping the valve and checking if idle stabilizes.
Thank you for your time,
Old 11-28-2007, 01:51 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)