View Single Post
Jascha Jascha is offline
Registered User
 
Jascha's Avatar
 
Join Date: Sep 2003
Location: PA of USA
Posts: 655
Wayne,

Is there a microswitch that is activated by the accelerator linkage— this switch ordinarily (84-89 911 models) closes when 'off the accelerator', and if you are above some DME set engine speed (e.g. ~1200 rpm) the DME will modulate the injectors accordingly. If you’re below this 'measured' RPM, (i.e., switch is closed @idling) it will override and not shut-down the injectors...

In short, if the 'measured' RPM is incorrect that might give rise to what you described above...


Jascha

Last edited by Jascha; 11-30-2007 at 03:53 AM..
Old 11-28-2007, 04:24 AM
  Pelican Parts Technical Article Directory    Reply With Quote #8 (permalink)