View Single Post
Alan L Alan L is offline
Registered User
Alan L's Avatar
Join Date: Apr 2006
Location: New Zealand
Posts: 3,247
Originally Posted by beepbeep View Post
. As you can see, pistons has chewed trough O-ring gasket and divided it into two rings. If you compare your pic to mine, you'll see that inner part of gasket has separated on your BOV and piston is making metal-to-metal contact.
So you think there was originally one ring, and the piston has chopped it off into smaller one? I thought the small one looked like it sat under the spring tube - it fits about right. But that leaves the piston with nothing to seat on - so you could be right. It fits neatly inside the larger ring. It is a very neat slice tho if this is the case. The inner edge of the ring in the end plate is very clean. Does your system have anything for the spring tube to seat on, or is it normally metal-metal?
Old 12-07-2007, 01:24 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #13 (permalink)