Thread: boost bleed off
View Single Post
Alan L Alan L is offline
Alan L's Avatar
Join Date: Apr 2006
Location: New Zealand
Posts: 3,550
I don't think my injectors are leaking - but anything is possible - I have so many leaks to find, until I start nailing some of them they won't all be obvious. But the engine leaks I can find easily are between the big flat inlet manifold and injector block - the bits the injectors screw into. My compressor is not huge - 200 l/min. Until I plugged the open line behind the fuse box, it struggled to get to 0.1 bar. Now I can do 0.5 bar, so still loosing lots somewhere.
Am I not pressurising the whole system from here? - the inlet manifold is obviously pressurised - by the leaks I see. Any suggestions what I should do with the hose above the BOV - as I suspect that is the one I have plugged - even tho it exited behind the fuse box.
Old 12-19-2007, 03:00 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #25 (permalink)