View Single Post
Tom Oxner Tom Oxner is offline
Registered User
Join Date: Nov 2006
Location: Conway,AR
Posts: 1,180
930 Rebuild Questions-Gaskets

I am in the process of disassembling the engine in my 85 930. I plan to rebuild the engine using the C2 Turbo P&C's that I bought last summer. Since the C2 P&C's require the viton rings for the base of the cylinder and the head gaskets, should I get the gasket set for the C2 or the gasket set for the 85 930? Is there anything that the C2 gasket set would not included that I would need for the 85 engine?
I have seen photos of 930 connecting rods with offset bushings to get a little extra compression. In order to do this, would special bushings be needed or do the stock bushings have enough metal in them to allow offset machining?
Thanks for your help.

Tom Oxner
Old 12-19-2007, 09:03 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)