Thread: boost bleed off
View Single Post
Alan L Alan L is offline
Registered
 
Alan L's Avatar
 
Join Date: Apr 2006
Location: New Zealand
Posts: 3,550
Thanks Goran - Can't find them listed at Pelican at moment. But will pull the gear off (for 10th time) and have a look. This may explain the backfire I get after cruising for a few minutes at light throttle load - what leaks under pressure also leaks under vacuum.
The 930 injectors don't have the O ring - they seat into the phenolic blocks on a copper washer. Much better.
I have the Vac servo line + check valve. Alongside that the banjo above the BOV leads off another line following the servo line. I have checked and it is connected to the open vent line behind the fuse box up front. Weird - must have had something else hooked into it. Maybe I need to find one of those damper things - the mounting holes are there on the manifold.
Alan
Old 12-20-2007, 09:55 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #30 (permalink)