View Single Post
Jim2 Jim2 is online now
7.0:1 > 11.3:1
 
Join Date: Oct 2003
Location: Calgary
Posts: 1,839
Garage
Since you said you have a few 3-4 clean threads exposed, run a tap into the hole. If you can get one from an industrial supplier called a bottoming tap (very common) it will have little taper and should align on the exposed threads. Upon failure... helicoil. The tap is a $15 item.
Old 01-01-2008, 03:19 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #20 (permalink)