View Single Post
les_garten les_garten is offline
Macht Schnell
les_garten's Avatar
Join Date: Jun 2003
Location: PSL, FL
Posts: 861
Originally Posted by Wolf300tt View Post
The wheels on my '78 are 16". The rears are 11" wide. I cannot find large enough tires to properly fit out the wheel width. I think my best avenue is to replace the rear "halves" with 17".

My question is: do any of you guys recognize the wheel or have an idea who might have built them? As you can see, they are very well done. They have kind of a unique head on the bolts that hold them together. There are about 12 points on the head of the bolt as opposed to 6 points on a standard bolt. (They are not allen head.) Maybe that will help.

If they are not recognizable to you guys, maybe you have a suggestion as to where I can send them to get some suggestions.


What tires are on the back now? Do you have a low angle Pic from the rear showing what you are talking about?

---Les Garten---85 930, Andial IC, GHL Headers, Fabspeed Dual, K-27 HF2, 3.4 JE Full Finned 7.5:1 CR, 964 CAM'd, Carerra 3.2 Manifold Cut/Flipped, Tec3r, Siemans 55#, GSF Fuel Rails, Clewett Crank Trigger, Clewett Cam Trigger,Dual Plugged, ARP Head Studs/Rod Bolts, Clewett Wires.Tial 46mm WG, Tial 50mm BOV, WEVO Shifter,934 Boost Gauge, Wideband EGO Sensor/Gauge, C2T Head Gaskets, '88 MB 300TE,BMW R100RT
Old 01-06-2008, 02:31 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)