View Single Post
JFairman JFairman is offline
Registered User
Join Date: Jul 2006
Location: S. Florida
Posts: 7,267
If you look at the head on picture, you can see that the front bumper is about a half inch lower on the passenger side.
Compare the distance from the fender to the bumper under the headlight on each side, it's easy to see.
The gap between the hood and fender is bigger on the passenger side too.
The back edge of rear deck lid is a little higher on the passenger side too. That may just need the little rubber stopper on the under side of the hood screwed in a turn or so.
You can see what I'm seeing right above the right side bumperette from the very low angle picture.

It may be from collision damage before the paint job so get a PPI.

It may be a great deal though and realighning the bumper, hoods, and front spoiler just takes some time and patience if nothing is bent.
Old 01-11-2008, 08:11 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #16 (permalink)