View Single Post
les_garten les_garten is offline
Macht Schnell
 
les_garten's Avatar
 
Join Date: Jun 2003
Location: PSL, FL
Posts: 861
Quote:
Originally Posted by mb911 View Post
you gotta look at cgar's method best by all accounts.

1st snug adjuster up so zero clearance, back off 1/8th turn, dead on everytime..

pretty easy
I kinda use a combination of both techniques. After adjusting a few valves and watching how much I had to backoff to get to the the .0025 measurement. I arrived at the same method as his, but I check with the backside feelers.

I still think you have to check it though. It is somewhat difficult to tell "exactly" where you are at zero clearance. You can have a "little" push on the valve if you are not careful.

Les
__________________
---Les Garten---85 930, Andial IC, GHL Headers, Fabspeed Dual, K-27 HF2, 3.4 JE Full Finned 7.5:1 CR, 964 CAM'd, Carerra 3.2 Manifold Cut/Flipped, Tec3r, Siemans 55#, GSF Fuel Rails, Clewett Crank Trigger, Clewett Cam Trigger,Dual Plugged, ARP Head Studs/Rod Bolts, Clewett Wires.Tial 46mm WG, Tial 50mm BOV, WEVO Shifter,934 Boost Gauge, Wideband EGO Sensor/Gauge, C2T Head Gaskets, '88 MB 300TE,BMW R100RT
Old 02-06-2008, 11:24 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #20 (permalink)