Thread: boost bleed off
View Single Post
beepbeep beepbeep is offline
Registered User
 
beepbeep's Avatar
 
Join Date: Jun 2001
Location: Sweden
Posts: 5,515
No SC disc. 930 uses 240Nm dics, SC uses 225mm disc. There are spring centered 930 discs. 3.0 930 used sping centered discs, 3.3 used rubber. Sping fits into stock pressure plate (you can re-use it if it isn't scored). You usually need new T/O bearing if fitting "shallow" pressure plate but if you use original "deep" pressure plate you should be able to re-use T/O bearing as well.

Re-surface the flywheel if possible. Just do a quick shave to get rid of scores.

So:

1. Used or new spring-damped 240mm 930 clutch disc.
2. Re-surface the flywheel (new 12.9 bolts + correct torque please!)
3. Check pressure plate and T/O bearing and re-use if possible.
__________________
Thank you for your time,
Old 02-10-2008, 08:29 AM
  Pelican Parts Technical Article Directory    Reply With Quote #43 (permalink)