View Single Post
RarlyL8 RarlyL8 is offline
Crotchety Old Bastard
RarlyL8's Avatar
Join Date: Jan 2000
Location: Huntsville, AL
Posts: 14,387
Center Outlet Muffler for the 930

Finished this prototype up this evening.
It turned out better than I had hoped for! The flexibility is freakin' great. You can put the tip just where you want it.
The 180* bend will rotate axially while the tailpipe can pull in/out and rotate up and down. You can use it with or without a valance as it can tuck up to the muffler body or extend down if you have a valance.
I plan to use T-bar clamps to secure everything.
The spacer band clamps to both the muffler body and tailpipe to secure the entire unit from vibration.

And the best part? It works with the 934 W/G pipe.

RarlyL8 Motorsports / M&K Exhaust - 911/930 Exhaust Systems, Turbos, TiAL, CIS Mods/Rebuilds
'78 911SC Widebody, 930 engine, 915 Tranny, K27, SC Cams, RL8 Headers & GT3 Muffler. 350whp @ 0.75bar
Brian B. (256)536-9977 Service@MKExhaust Brian@RarlyL8
Old 02-21-2008, 05:31 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)