View Single Post
icemann427 icemann427 is offline
Registered User
 
icemann427's Avatar
 
Join Date: Jan 2008
Posts: 885
Brian, I happened on to a couple of pictures that show the metal start to the very difficult line that goes along the top of the crankcase and just over the cooling plastic that I told you about. If you find the oil sending unit in the pictures, you will see a metal banjo just beneath it that said sending unit plugs into. That metal line ends up about over the left rear cylinder where it turns into a rubber hose leading to the turbo with another solid fitting. ALSO, in the pictures you will see an approximate 3/4" metal line that plugs into a gooseneck just to the left of the oil sending unit. The cloth/rubber hose that ties that steel line into the crankcase will go bad over time and will leak. If you take off your air cleaner and intercooler you will be able to look at this area and replace that short hose, if necessary.
Old 02-26-2008, 05:45 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #40 (permalink)