View Single Post
beepbeep beepbeep is offline
Registered User
beepbeep's Avatar
Join Date: Jun 2001
Location: Sweden
Posts: 5,564
Move the LSD to 930 box (should fit) and keep the 930. You can make the 915 work for a while but it's not worth it.

You'll need another front mount as well (915 has shorter bellhousing) and you'll be able to break it at will. Side plate needs to be swapped to billet one at least, to lessen the flexing issue. Pinion bearing plate should be reinforced as well. 1:st should be almost unusable so you end up with fragile 4-speed box wit short gearing. Too much fuss.
Thank you for your time,
Old 02-29-2008, 12:08 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)