View Single Post
Alan L Alan L is offline
Registered User
 
Alan L's Avatar
 
Join Date: Apr 2006
Location: New Zealand
Posts: 3,261
OK - so it sounds like I should be looking closely at the fork and lugs on the TOB.
What are the symptoms of it not properly aligned/engaged?
I agree about flywheel bolts - I always replace, and loctite - but not heard of the pressure plate bolts doing same. This problem has occured directly after assembly - the engine has not been run. Still only partly installed - not sure whether it is going in, or coming out.
Thanks
Alan
Old 03-10-2008, 07:49 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #16 (permalink)