View Single Post
Alan L Alan L is offline
Alan L's Avatar
Join Date: Apr 2006
Location: New Zealand
Posts: 3,618
OK - now we are getting somewhere. I've been back underneath and fiddled with the fork lever. It feels odd - lumpy and catching in a place or two. Not right. So, now I know what I'm looking for - altho I'm still not sure how to line it up right. I mated the two flats on the fork to the flats on the lugs on the TOB.
Is there some way I'm supposed to line the pressure plate up. Can't really see that - there is no give in the bolt holes.
But I'll pull the engine again.
AND while I'm in there - change the pp bolts.
If anyone has any tips about how to line this dam fork up, I'd like to know. I'm going to have a good look at it before I split it.
Old 03-10-2008, 09:06 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #22 (permalink)