View Single Post
beepbeep beepbeep is offline
Registered User
 
beepbeep's Avatar
 
Join Date: Jun 2001
Location: Sweden
Posts: 5,560
Bung should be after the turbo, as heat and pressure prior to turbo makes it err. It should be welded slightly upwards, to avoid soaking the tip in condensation.

It should be removed if sensor heater isn't connected as exhaust would clog it otherwise. Distance from turbo is not so critical, anything from 3 inches to just before the exhaust tip works.
__________________
Thank you for your time,
Old 03-20-2008, 10:21 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)