View Single Post
RarlyL8 RarlyL8 is offline
Crotchety Old Bastard
 
RarlyL8's Avatar
 
Join Date: Jan 2000
Location: Huntsville, AL
Posts: 13,255
Garage
You cannot -1 on this, the wheel is the factor. At 14" actual wide it will hit the inner fender well if centered in the well. Even if you put skinny tires on the rims the rim lip would stick out past the fender flare. It just wouldn't look good IMHO.

On my car 13.5" is the limit. To get that I had to:
- cut the fender lips off completely
- move the oil lines
- grind the banana arm bolts down to 1/4" from flush
With all of that the 345mm tires would still haze the upper well in a hard turn at the track.

That tire size listed is not correct. Nobody makes a 355/35-17 and if they did it would be nearly 27" tall
__________________
RarlyL8 Motorsports / M&K Exhaust - 911/930 Exhaust Systems, Turbos, TiAL, CIS Mods/Rebuilds
'78 911SC Widebody, 930 engine, 915 Tranny, K27, SC Cams, RL8 Headers & GT3 Muffler. 350whp @ 0.75bar
Brian B. (256)536-9977 Service@MKExhaust Brian@RarlyL8
Old 03-24-2008, 07:51 PM
  Pelican Parts Technical Article Directory    Reply With Quote #9 (permalink)